Displayed Messages - Electrolux EBC54524 User Manual

22 www.electrolux.com

21. DISPLAYED MESSAGES

Displayed message
FILL TANK!
GROUND TOO FINE AD-
JUST MILL AND
(alternating with)
PRESS OK
GROUND TOO FINE AD-
JUST MILL AND
(alternating with)
PRESS OK
(then)
FILL TANK!
EMPTY WASTE COFFEE
CONTAINER
INSERT WASTE COFFEE
CONTAINER
ADD PRE-GROUND COF-
FEE
PLEASE DESCALE!
LESS COFFEE
Possible cause
The water tank is empty or
positioned incorrectly.
The grinding is too fine and
the coffee is delivered too
slowly.
The tank has been re-
moved during delivery.
The waste coffee container
(A4) is too full or more than
3 days have passed since
you last made coffee (this
guarantees correct hygiene
of the machine).
After cleaning, the waste
coffee container has not
been replaced.
The "pre-ground coffee"
function has been selected
without placing any pre-
ground coffee in the funnel.
The funnel (A21) is
blocked.
The machine must be
descaled.
Too much coffee has been
used.
Remedy
Fill the tank with water and/
or insert it correctly, push-
ing it as far as it will go.
Turn the grinding adjust-
ment knob one click clock-
wise towards "7".
Insert the tank and press
the OK icon (B9).
"HOT WATER PRESS OK"
is displayed.
Press the OK icon (B9)
again.
The appliance is once
again ready for use.
Empty the waste coffee
container and clean, then
replace.
Important: when remov-
ing the drip tray, the waste
coffee container MUST be
emptied, even if it is not
completely full.
If this is not done, when you
make the next coffees, the
waste coffee container may
fill up more than expected
and clog the machine.
Open the service door and
insert the waste coffee
container.
Extract the appliance and
place pre-ground coffee in
the funnel.
Empty the funnel with the
help of a knife as described
in the section "Cleaning the
pre-ground coffee funnel".
The descaling procedure
described in the "Descal-
ing" section needs to be
performed as soon as
possible.
Select a milder taste or
reduce the quantity of pre-
ground coffee, then make
the coffee again.