PRODUCT OVERVIEW The Quest Engineering QX-41500 is a 4 channel 2RU power amplifier suited for any application requiring superior performance and reliability. Ideal for multiple zone applications providing commercial sound installations with clean and reliable power. The QX-41500 provides 1500 watts per channel of operation into 4 and 8 ohm loads, delivering full channel power to either low- or high-impedance loads.
• In the event of storms and/or lightning, ensure designed for this product. all devices are disconnected from mains power in order to prevent damage to any of the units in the system. QUESTAUDIO.NET QX-41500 USER MANUAL | 03...
Off - Amplifier will not limit LIMIT On - Amplifier will limit to prevent clipping Off - Amplifier will not enter power saving mode A-STBY On - Amplifier will enter sleep mode after 25 minutes of no signal QUESTAUDIO.NET QX-41500 USER MANUAL | 04...
Page 6
The QX-41500 is not designed to run Bridge mode, it is capable of running high or low impedance loads on each individual channel. If Bridge mode is required another model from the Quest Engineering range should be selected.
Mute mode puts the amp into a “light sleep” and occurs when the Standby option has been selected and no signal has been detected for 10mins, if the amplifier detects signal it will wake within 1ms. When no signal has been detected for 25 mins full sleep mode will activate. QUESTAUDIO.NET QX-41500 USER MANUAL | 07...
*** The figures shown above are ‘real world’, usable specifications and Fan cooled, temperature Cooling are conservative as a result. Quest Engineering does not believe in dependent portraying misleading or exaggerated specifications. QUESTAUDIO.NET QX-41500 USER MANUAL | 09...
REGISTER YOUR PRODUCT Thank you for choosing Quest. Please take the time to complete your product registration. Registering your Quest Engineering product will: • Confirm your warranty • Register your product • Protect your new product REGISTER ONLINE questaudio.net/warranty-reg/ For spare parts and service,...