Installing The System Board - Dell vostro 15-3562 Owner's Manual

Installing the system board

1 Connect the power cable cable.
2 Affix the white adhesive tape.
3 Flip the system board.
4 Align the system board with the screw holders on the computer.
5 Tighten the M2L3 screws to secure the system board to the computer.
6 Tighten the display hinge screw to the computer.
7 Connect the following cables to the system board.
a hard drive connector
b touchpad connector
c speaker connector
d I/O connector
e eDP connector
f power connector
8 Install the:
a system fan
b heat sink
c memory module
d WLAN Card
e hard drive assembly
f base cover
g keyboard
h optical drive
i battery
42 Removing and installing components