Listening To The Radio - Hitachi UR 18DSAL Manual

Hide thumbs Also See for UR 18DSAL:
Table of Contents

Advertisement

Set the time
Using the control panel, follow the steps below to set
up the time.
1. Press the Menu button.
2. Press the Select button and display "CLOCK
ADJ".
CLOCK ADJ
3. Press the Enter / Information button.
4. Press the Select button and adjust "hour" digits.
12 : 00
5. Press the Enter / Information button.
6. Press the Select button and adjust "minute"
digits.
12 : 55
7. Press the Enter / Information button.
8. Press the Select button and select "12H" or "24H"
12H 24H
9. Press the Enter / Information button.

LISTENING TO THE RADIO

Selecting FM or AM bandwidth
1. Power ON.
2. Press the Source select button and select the
radio's bandwidth (FM/AM).
Selecting stations
Auto station selection
A long press of the Search button will automatically
scan and search clear station broadcast frequencies.
To select the next station broadcast, long press the
Search button again.
(Long Press)
000Book_UR18DSAL_US.indb 15
Manual station selection
Press the Search button to change frequencies and
select a station.
Preset station selection
Press the Select button to quickly switch between
preset stations.
At the time of purchase, there are no preset stations.
Follow the steps below to register preset stations.
<Manual preset registration>
1. Tune into a radio station of your choice and press
the Menu button.
2. Press the Select button and display "PRESET".
PRESET
3. Press the Enter / Information button.
4. Press the Select button and select a preset
number from 0 to 9 for registering the station.
PRESET 2
5. Press the Enter / Information button to register the
station.
<Auto preset registration>
This feature allows the automatic registration of
available radio stations in the area of use.
(Maximum of 10 stations)
1. Press the Menu button.
2. Press the Select button and display "AUTO
SCAN".
AUTO SCAN
3. Press the Enter / Information button to begin auto
preset registration of available radio stations.
NOTE
○ A broadcasting radio station will not be registered
if its frequency is weak.
○ Depending on location of use, non-radio signals
such as noise may be registered.
○ See page 19 when recharging with USB in "FM"
mode.
English
15
2015/03/06 16:58:38

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents