Page 15
Applying Sealing Strip Place the hob into the aperture * Note Please cut hole accurately Mark the perimeter of the hob with a pencil Remove hob and apply adhesive seal inside and up to the marked line...
Page 16
User manual LAM1005 Installation above a kitchen unit with door & drawer Worktop 10mm The panel installed below the hob must be easy to remove and let an easy access in case a technical assistance intervention is necessary. oven or partition...
Page 17
table on P.20. For some models a conic link is furnished r o f a l l o i t i r t this type of this link is obligatory: in the image below it is pointed out how to recognise the different links (CY= cylindrical, CO= conic).
Page 19
Your hob is registered GAS SAFE installer who will comply with all relevant gas, IEC and local regulations. _ 19...
Page 20
General Gas Power G 20/20 mbar (methane) 666 I / h G 30/28-30 mbar (LPG) 509 g/h Installation Class Voltage/ Frequency V / Hz 220-240 V / 50Hz Electrical Input Power Electric Ignition Product Dimension 585 x 510mm Electrical Flex Size / Type 0.75mm 3 Core H05V2V2 Gas Type...
Need help?
Do you have a question about the LAM1005 and is the answer not in the manual?
Questions and answers