Miele WTH 120 WPM Operating Instructions Manual page 10

Warning and Safety instructions

The washer-dryer must be isolated from the electricity supply
when cleaning and maintaining the machine and in the event of a
fault.

The Miele "Water protection system" protects from water damage
provided the following conditions are met:
– The machine is correctly plumbed in and connected to the
electricity supply.
– If a fault or damage has been identified, the washer-dryer must be
examined by a competent person before further use, and repaired
if necessary.

The water flow pressure must be at least 100 kPa and should not
exceed 1000 kPa.

Faulty components must only be replaced by genuine Miele
original spare parts. Only when these parts are fitted can Miele
guarantee the safety standards of the machine.

If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.

This washer-dryer must not be used in a non-stationary location
(e.g. on a ship).

Do not make any alterations to the washer-dryer, unless
authorised to do so by Miele.

Reliable and safe operation of this washer-dryer can only be
assured if it has been connected to the mains electricity supply.
10