Select Programme Settings; Add Detergent; Programme Start/Finish - Miele WTH 120 WPM Operating Instructions Manual

4. Select programme settings

 Select the degree of soiling level.
 Select the temperature, spin speed
and drying level and confirm each
with OK.
The minimum spin speed is limited to
800 rpm.
In some programmes it cannot be
altered.
To prevent laundry forming a ring
against the drum wall, the spin speed
is limited to a maximum of 1200 rpm
when washing and drying in a
continuous sequence.
 Select further options if required.
The spin speed for washing is used for
the thermospin.
The spin speed is limited to a
maximum of 900 rpm if Extra quiet has
been selected.
The thermospin is not carried out if
timed drying is selected.
 Select a delay start time if required.
WASHING AND DRYING

5. Add detergent

 Dispense detergent either via
TwinDos, Cap dosing or the detergent
dispenser drawer.

6. Programme start/finish

 Press the Start/Stop button.
The door will lock and the programme
status will appear in the display.
The anti-crease phase will start at the
end of the programme.
The door remains locked during the
anti-crease phase.
 Press the Start/Stop button.
The door will unlock.
If you have unloaded the drum
during the anti-crease phase make
sure you spread it out to cool down.
The door unlocks automatically at the
end of the anti-crease phase.
 Pull the door open and unload the
drum.
See "After each washing or drying
programme".
67