Miele WTH 120 WPM Operating Instructions Manual page 109

Changing the detergent type
Dosage amounts for Miele products
(e.g. UltraColor, Miele fabric
conditioner) are pre-set for water
hardness range II ().
Detergent / amount
 Touch the OK sensor.
Compartment 1
 Touch the OK sensor.
Miele UltraPhase 1
 Select the detergent you want using
the  and  sensors and confirm
your selection with the OK sensor.
Miele UltraColor
Dosage - C. 1
 Confirm the amount of detergent with
the OK sensor or change this using
the  and  sensors.

Settings for compartment 2 rejected
 Confirm the message with the
OK sensor.
Compartment 1
 Select Compartment 2 using the
 and  sensors and confirm your
selection with the OK sensor.


 
 
105 ml

Not defined 
 Select the detergent you want using
the  and  sensors and confirm
your selection with the OK sensor.
Miele conditioner
Dosage - C. 2
 Confirm the amount of detergent with
the OK sensor or change this using
the  and  sensors.
The electronics are set for the new
detergent.
Maintenance
The washer-dryer has a cleaning
programme for cleaning the TwinDos
system containers and the hoses
inside the machine.
The TwinDos system must be cleaned if
the system has not been used for a
long period of time or if you are
changing brand of liquid detergent or
fabric conditioner. See "Cleaning and
care - Cleaning the TwinDos system"
for more details.
Settings

 
70 ml
109