Kyocera FS-C1020MFP Plus Service Manual page 37

Replacement and Adjustment
11. Take out the harnesses [F] (
12. Remove the laser optics housing unit.
After replacing the laser optics housing unit
1. Open the front cover and turn on the machine.
 Do the following 2 steps with the front cover of the machine open.
 On the LCD, access "LSU Adjustment" inside the "Engine Maintenance" menu.
 Manually input the corresponding LSU data from your supervisor into the space
provided on the LCD.
2. Close the front cover.
3. Perform "Color Registration" in the "Engine Maintenance" menu.
4. Turn the power off and on.
x 1).
27