Electromagnetic Compatibility - Mazda 3 Owner's Manual

Customer Information and Reporting Safety Defects

Electromagnetic Compatibility

Your Mazda has been tested and certifi ed to ECE Regulation No.10 as related to
electromagnetic compatibility. Radio Frequency (RF) transmitter equipment (e.g. cellular
telephones, amateur radio transmitters, etc.) may only be fi tted to your Mazda if they
comply with the parameters shown in the table below.
It is your responsibility to ensure that any equipment you have fi tted complies with
applicable local legislations. Have any equipment fi tted by properly trained technicians.
Do not mount any transceiver, microphones, speakers, or any other item in the
deployment path of the air bag system.
Do not fasten aerial lead to original vehicle wiring, fuel pipes or brake pipes. Avoid
running the aerial lead parallel with the wire harness to the best extent possible.
Keep the aerial and power leads at least 100 mm (3.9 in) from any electronic modules
and the air bags.
Avoid using the cigar lighter or accessory socket as a power source for the RF-
transmitting equipment.
8–16
Electromagnetic Compatibility
CAUTION