Download Print this page

Mazda 3 Owner's Manual page 426

Hide thumbs Also See for 3:

Advertisement

Interior Features
®
Bluetooth
Speak clearly, without pausing between
words or numbers.
Close the windows and/or the sunroof
to reduce loud noises from outside
the vehicle, or turn down the airfl ow
of the air-conditioning system while
®
Bluetooth
Hands-Free is being used.
Make sure the vents are not directing air
up towards the microphone.
NOTE
If the voice recognition performance is
not satisfactory.
Refer to Voice Recognition Learning
Function (Speaker Enrolment) (Type A/
Type B) on page 5-109 .
Refer to Troubleshooting on page 5-149 .
Security Setting (Type A/Type B)
If a password is set, the system cannot be
activated unless the password is input.
NOTE
Do this function only when parked. It is
too distracting to attempt while driving
and you may make too many errors to
be effective.
Password setting
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] "Setup"
3. Prompt: "Select one of the following:
Pairing options, confi rmation prompts,
language, password, select phone or
select music player."
4. Say: [Beep] "Password"
5–108
5. Prompt: "Password is disabled. Would
you like to enable it?"
6. Say: [Beep] "Yes"
7. Prompt: "Please say a 4-digit
password. Remember this password. It
will be required to use this system."
8. Say: [Beep] "XXXX" (Say a desired
4-digit password, "PCode".)
9. Prompt: "Password XXXX (Password,
PCode). Is this correct?"
10. Say: [Beep] "Yes"
11. Prompt: "Password is enabled."
®
Using Bluetooth
password
1. Press the pick-up button or talk button
with a short press.
2. Prompt: "Hands-Free system
is locked. State the password to
continue."
3. Say: [Beep] "XXXX" (Say the set
password "PCode".)
4. If the correct password is input, voice
guidance "XXXXXX... (Ex. "Mary's
device") (Device tag) is connected" is
announced.
If the password is incorrect, voice
guidance "XXXX (4-digit password,
Pcode) incorrect password, please try
again" is announced.
Cancelling the password
NOTE
Do this function only when parked. It is
too distracting to attempt while driving
and you may make too many errors to
be effective.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] "Setup"
Hands-Free with a

Hide quick links:

Advertisement

loading