Mazda 3 Owner's Manual page 457

How to Use the Bluetooth
Switching to Bluetooth
To listen to music or voice audio recorded to a Bluetooth
®
Bluetooth audio mode to operate the audio device using the audio system control panel.
®
Any Bluetooth audio device must be paired to the vehicle's Bluetooth
used.
®
Refer to Bluetooth
1. Turn on the Bluetooth
2. Switch the ignition to ACC or ON.
3. Select the icon on the home screen and display the Audio screen.
4. When Bluetooth
NOTE
If the Bluetooth
If the mode is switched from Bluetooth
audio playback from the Bluetooth
Playback
To listen to a Bluetooth
®
Bluetooth audio mode. (Refer to "Switching to Bluetooth
After switching to the Bluetooth
lower part of the display. Icons which can be used differ depending on the version of the
®
Bluetooth audio device which you are currently using.
Icon
Displays the Audio menu. Use to switch to a different audio source.
(AVRCP Ver. 1.4 only)
Displays the top level folder/fi le list.
Select the folder which you want to select.
The fi les in the selected folder are displayed.
Select the fi le you want to play.
(AVRCP Ver. 1.3 or higher)
Replays the song currently being played repeatedly.
When selected again, the songs in the folder are played repeatedly.
Select it again to cancel.
Icons change when the song is repeated or the folder is repeated.
®
Audio System
®
audio mode
Preparation (Type C/Type D) on page 5-111 .
®
audio device's power.
®
is selected, switches to the Bluetooth
®
audio device does not begin playback, select the
®
audio device over the vehicle's speaker system, switch the mode to
®
audio mode, the following icons are displayed in the
®
®
audio mode to another mode (radio mode),
®
audio device stops.
Function
Bluetooth
audio device, switch to the
®
unit before it can be
®
audio mode to begin playback.
icon.
®
audio mode")
Interior Features
®
5–139