Table of Contents
Advertisement
3.4
External Device Provisioning
The External Device Provisioning section of the EWR Device Administration page is used to
configure addresses for the attached nodes on the local Ethernet segment.
Up to three
addresses are provisioned.
Figure 3-9.
External Device Provisioning Table
The Enable checkbox indicates this row contains a valid address. Any address can be disabled
by clearing the checkbox. The pull-down menu options indicate whether this address will be
offered via the "Local-DHCP" or "Statically-Provisioned".
The Statically-Provisioned setting is used to support devices that do not use DHCP to acquire
an address.
The MAC address field is used for Local-DHCP addresses, so that the IP address can be
24
Advertisement
Table of Contents
