Introduction; Device Description; Intended Uses; Features Of Petmap+Ii - petMAP + II Operator's Manual

INTRODUCTION

Device Description

petMAP+II is a small, light weight and portable battery operated monitoring device designed for
veterinary use. In its various configurations, the base unit is capable of measuring blood pressure
(systolic, diastolic and mean arterial pressures), heart rate, temperature and oxygen saturation (SpO2).
The measured values are displayed and trended on the device continuously. Modules for ECG and CO2
can also be purchased and added to the base unit. Data trended on the petMAP+II can optionally be
saved on an SD memory card via the petMAP+II's integrated SD memory card slot.
A user interacts with petMAP+II using its touch screen, just like many smart phones. The device has two
primary modes of operation: "Clinic Mode" (where BP automatic cycling is disabled and BP
determinations are triggered by the user directly) and "OR Mode" (where BP automatic cycling is
enabled and BP determinations automatically repeat at the user selected time cycle). In Clinic Mode, BP
measurements are made under operator control and in OR Mode, petMAP+II is set to monitor
noninvasive blood pressure (NIBP) and heart rate vital signs automatically at user-selected time
intervals. Both modes allow the user to set alarms for systolic blood pressure and/or for SpO2
saturation levels.

Intended Uses

petMAP+II is intended to be used on veterinary patients when measuring or monitoring of blood
pressure, heart rate, temperature and/or SpO2 is desired. It can be used on a wide variety of veterinary
patients, but is primarily designed for companion animals. petMAP+II can be used on both awake and
anesthetized patients; its applications include use for surgical, ICU and trauma monitoring as well as use
in the exam room and during procedures (imaging, dentals, etc.).

Features of petMAP+II

•
Portability: petMAP+II's weight and size just may make it the most portable and versatile
monitoring device in veterinary medicine. It is a single device that can be used in the OR, ICU,
trauma, dentals, exam room, transport and for mobile practices! And when not in use, it can be
in your pocket... ready for action... anywhere, any time.
• Accuracy: petMAP's proprietary BP, including PPO (PetMAP Proprietary Optimizations) and NSV
(Nominal Session Value). petMAP+II utilizes the oscillometric method which simplifies the
measurement of blood pressure over traditional Doppler techniques. petMAP+II also provides
all of the BP parameters (systolic, diastolic, mean arterial pressure (MAP) and heart rate),
enabling accurate diagnosis and management of hypertension and useful monitoring during
surgical anesthesia and other procedures.
•
Modularity and upgradability: Modules for ECG and CO2 may be purchased. These modules
allow the base unit (#7400, #7402, #7404) to be configured by the user for added functionality.
In addition, the 7400 can be upgraded to either a #7402 or #7404 as a service upgrade.
6