Device Overview; Power/Batteries - petMAP + II Operator's Manual

DEVICE OVERVIEW

Power/Batteries:

petMAP+II is equipped with 4 rechargeable AA NiMH batteries (factory installed)
and an external wall outlet plug-in AC/DC adapter. (Note: remove the green plastic tag at the battery
cover to activate the batteries before attempting first use.) The AC/DC adapter can operate the unit
while charging the batteries and may be left charging continuously.
The petMAP+II may also operate on 4 AA alkaline or lithium batteries (these are non-rechargeable
battery types); however, the AC/DC adapter should never be used when using batteries other than
NiMH rechargeable batteries. (See WARNINGS)
The petMAP+II AC/DC adapter is equipped with standard North America/Japan blades. If purchased,
accessories exist to configure the AC/DC adapter for plug compatibility to several international options.
To exchange the plug, simply press the round, spring-loaded button, twist and remove the plug supplied
and replace it with the appropriate one for local use. (See instructions which accompany the
International Adaptor Plugs, Code 9008.)
18