Using A Battery Pack (Sold Separately) - JVC JY-HM360AG Instructions Manual

Using a Battery Pack (sold
separately)
Charging the Battery
Charge the battery immediately after purchase or
when the battery power is running low.
2
POWER
1
ON
OFF
MODE
.
1 Hold down the lock button (blue) at the
center of the [POWER ON/OFF] switch to set
to "OFF".
2 Attach the battery.
Slide it in until you hear a click.
3 Connect the supplied AC adapter to the
[DC] terminal.
Open the cover of the [DC] terminal and connect
as shown in the diagram.
4 Connect the AC adapter to a power outlet.
The [POWER/CHG] lamp blinks during
0
charging and will go out after charging is
complete.
Remove the AC adapter after charging is
0
complete.
Memo :
Blinking of the [POWER/CHG] lamp during
0
charging indicates the charge level.
[POWER/CHG] Lamp
Orange blinking
(4 times per second)
Orange blinking
(3 times per second)
Orange blinking
(2 times per second)
Orange blinking
(1 time per second)
Light goes out
You can charge the battery even when operating
0
the camera recorder using the AC adapter.
10

Using a Battery Pack (sold separately)

Removing the Battery
4
POWER
/CHG
.
3
1 Hold down the lock button (blue) at the
4
2 While pressing and holding the [BATT.
Caution :
Estimated Charging and Continuous
Operating Times
o Charging time
*
Memo :
Charge Level
Less than 25 %
Less than 50 %
Less than 75 %
Less than 100 %
Fully charged
1 POWER
ON
OFF
MODE
center of the [POWER ON/OFF] switch to set
to "OFF".
RELEASE] button, push up and remove the
battery in the direction of the arrow.
Do not remove the battery when the [POWER
0
ON/OFF] switch is "ON".
Do not insert or remove the DC cable when the
0
battery is in use.
Leaving the camera recorder unused with the
0
battery inside will deplete the battery power
even if you set the [POWER ON/OFF] switch to
"OFF". Remove the battery if you are not using
the camera recorder.
Approx. 4 hrs (SSL-JVC50)
When the [POWER ON/OFF] switch is set to
"OFF"
If you charge the battery immediately after using
0
while the battery is still warm, it may not be fully
charged.
For details, refer to the "INSTRUCTIONS" of the
0
battery.
2