Table of Contents
Advertisement
Miscellaneous Functions
for Shooting and
Recording Methods
This camera recorder is equipped with various
functions for shooting.
The functions described here are the typical
functions of the camera recorder.
Miscellaneous Functions for Shooting
Assignment of user buttons:
0
You can assign functions to the buttons and use
them as user buttons.
Functions can be assigned to the buttons
according to the usability.
AF assist:
0
Allows you to set the auto focus point to the
preferred area or to near and far directions.
Focus Assist:
0
The focused area is displayed in color to allow
easy and accurate focusing.
Expanded focus:
0
Magnifies the preferred area to enable precise
focus to be established easily.
Zebra pattern:
0
Diagonal lines (zebra pattern) are displayed
only at the area with the specified luminance
levels.
Marker:
0
Displays the marker and safety zone when
determining the angle of view for the image
according to the shooting purpose.
Recording Methods
A Recording using both slots A and B
0
0
0
B Special recording
* Special recording can be specified in
conjunction with A under given conditions.
0
0
0
0
C Other recordings
0
Miscellaneous Functions for Shooting and Recording Methods
Continuous recording (Series Rec):
Enables seamless long hour continuous
recordings over the slots.
Record simultaneously at the same definition
(Dual Rec):
Allows you to create two clips of the same
content at the same time only on this camera
recorder.
Backup Rec:
Allows you to record only the preferred
scenes to one slot using the record and stop
operations while the other slot is continuously
recording.
Pre Rec:
Enables recording to go back to the specified
duration in seconds of the video and audio
before the actual recording start time. This
allows you to record a complete event without
missing the initial scenes even if you start the
recording late.
Clip Continuous Rec:
Allows you to consolidate several rounds of
"startstop recording" into one clip. You can
consolidate the clips while recording when
shooting on-and-off and shooting several
scenes.
Frame Rec:
Records as a single clip only in the specified
frame rate until the recording is stopped.
Useful for shooting clay animation.
Interval Rec:
Records and pauses repeatedly at the
specified time interval and frame rate, and
records as a single clip until the recording is
stopped.
Useful for observation recording.
Clip cutter trig:
You can split the clips freely without having
to stop recording during shooting.
19
Advertisement
Table of Contents
