Using Scene Select - JVC JY-HM360AG Instructions Manual

Memo :
[Clip Review] is assigned to [C.REVIEW/7]
0
button in factory default.
[Clip Review] can also be assigned to other user
0
buttons.

Using Scene Select

Changing Scene Select
Use the [SCENE SELECT] switch to change
camera settings easily and promptly according to
specific scenarios.
Set the [SCENE SELECT] switch to "A" or "B" to
enter the Scene Select mode. This allows the
camera recorder to enter a preset shooting mode.
.
When the camera recorder is in the Scene Select
mode, "SCN A" or "SCN B" appears on the screen.
4030 20 10 0
P 13000K
.
Setting Scene Select
You can set different shooting modes for "A" and
"B" of the [SCENE SELECT] switch.
1 Set the [SCENE SELECT] switch to "A" or
"B".
The camera recorder switches to the desired
set position ("A" or "B").
SCENE SELECT
B
A
OFF
00: 00: 00.00
Jan 12,2016
12 :34 :56
5 . 6f t
AE 6
+
0
dB
F1. 6
1/ 100
2 Press the [MENU/THUMB] button.
The Scene Select setting menu appears.
.
3 Select a shooting mode.
Use the cross-shaped button (JKH I) to
0
move the orange cursor. Select icons for the
shooting mode and press the Set button (R).
Icons being selected are indicated by a check
0
mark (P). Press the Set button again to
remove the check mark.
When a check mark appears beside an icon,
0
select i (Adjust) and press the Set button to
display the Adjust screen. You can adjust the
selected shooting mode.
4 Press the [MENU/THUMB] button.
Returns to the normal screen.
Memo :
The Scene Select mode operates regardless of
0
the [FULL AUTO ON/OFF] switch setting.
However, Full Auto mode will be "ON".
The status of the selected shooting mode can
0
be saved in both "A" and "B" of the [SCENE
SELECT] switch.
If a check mark does not appear for "Bright",
0
"Dark", "Hi Contrast", "Vivid" or "Sharp", the
Adjust screen will not appear.
When the Scene Select setting menu is
0
displayed, changing the [SCENE SELECT]
switch to "OFF" will close the Scene Select
setting menu and return to the normal screen.
When the [SCENE SELECT] switch is set to "A"
0
or "B", items in [Main Menu] B [Camera
Function] cannot be set.
Settings for [AE Level] are disabled during the
0
Scene Select mode.
Settings for [Camera Process] are disabled
0
during the Scene Select mode.
Basic Shooting Procedures
Cursor
(Orange Frame)
Check Mark
17