JVC LT-52GZ79 Service Manual page 16

4.5.4 ADJUSTMENT MODE
This mode is used to adjust the VIDEO CIRCUIT and the MTS CIRCUIT.
4.5.4.1 HOW TO ENTER THE ADJUSTMENT MODE
When the SERVICE MENU SCREEN of SERVICE MODE is displayed, press [1] key to enter the ADJUSTMENT MODE.
4.5.5 DESCRIPTION OF STATUS DISPLAY
ADJUSTMENT MODE
SETTING ITEM No.
SETTING ITEM
S001 S001 R DRIVE R DRIVE
PAL50 FULL PAL50 FULL
SIGNAL SYSTEM ZOOM MODE
(1) SIGNAL SYSTEM
The signal displayed on the screen is displayed.
PAL50 : PAL50Hz (Composite / S-video)
PAL60 : PAL60Hz (Composite / S-video)
SECAM : SECAM
NTSC3 : NTSC3.58
NTSC4 : NTSC4.43
525I : 525i (Component)
525P : 525p
625I : 625i (Component)
625P : 625p
1125I5 : 1125i 50Hz
1125I6 : 1125i 60Hz
RGB5 : RGB 525i
RGB6 : RGB 625i
PCVGA : PC (VGA)
PCXGA : PC (XGA)
H525I : HDMI 525i
H525P : HDMI 525p
H625I : HDMI 625i
H625P : HDMI 625p
H750P : HDMI 750p
H125I5 : HDMI 1125i 50Hz
H125I6 : HDMI 1125i 60Hz
--- : OTHER
(2) ZOOM MODE
State of the SCREEN SIZE or MULTI PICTURE is displayed.
SINGLE SCREEN
FULL : Full
JUST : Full Native
PANO : Panoramic
1609 : 16:9 Zoom
1609S : 16:9 Zoom Subtitle
1409 : 14:9 Zoom
REGU : Regular
MULTI SCREEN
FRZ : Freeze screen
M12 : 12-pictures screen
1-16 (No.YA665<Rev.001>)
SETTING VALUE (DATA)
137 137
STD STD H H
PICTURE MODE COLOUR TEMP.
(3) PICTURE MODE
SOFT : Soft
STD : Standard
BRI : Bright
(4) COLOUR TEMP.
H : Cool
M : Mid
L : Warm
(5) SETTING ITEM NAME
Setting item name are displayed. For the setting item names
to be displayed, refer to "INITIAL SETTING VALUES IN THE
SERVICE MODE".
(6) SETTING ITEM NO.
Setting item numbers are displayed. The setting item numbers
to be displayed are listed below.
Item No.
S001 - S009 Video system setting
T001 - T003 (NOT USED)
M001 - M224 (NOT USED)
F001 - F002 (NOT USED)
D001 (NOT USED)
Z001 (NOT USED)
(7) SETTING VALUE (DATA)
The SETTING VALUE is displayed.
4.5.6 CHANGE AND MEMORY OF SETTING VALUE
SELECTION OF SETTING ITEM
• [FUNCTION / ] key.
For scrolling up / down the setting items.
S001...S009 ↔ T001...T003 ↔ M001...M224 ↔
F001...F002 ↔ D001 ↔ Z001↔return to S001
CHANGE OF SETTING VALUE (DATA)
• [FUNCTION / ] key.
For scrolling up / down the setting values.
MEMORY OF SETTING VALUE (DATA)
Changed setting value is memorized by pressing [MUTING]
key.
Setting item