3.2.12 REMOVING THE LCD CONTROL PWB (Fig.3-2)
• Remove the REAR COVER.
(1) Remove the 4 screws [A].
(2) Remove the LCD CONTROL PWB COVER.
(3) Remove the LCD CONTROL PWB.
3.2.13 REMOVING THE INVERTER PWB (Fig.3-2)
• Remove the REAR COVER.
(1) Remove the 7 screws [B].
(2) Remove the INVERTER PWB COVER.
(3) Remove the INVERTER PWB by sliding it in the direction
of the arrow.
(4) Follow the same steps when removing another INVERTER
PWB.
LCD CONTROL PWB COVER
INVERTER PWB
COVER
INVERTER PWB
(MASTER-T)
LCD PANEL UNIT
INVERTER PWB (MASTER-B)
FRONT
A
B
LCD CONTROL PWB
C
PANEL FRAME
3.2.14 REMOVING THE BACK LIGHT UNIT (Fig.3-2)
• Remove the REAR COVER.
• Remove the STAND ASS'Y.
• Remove the SPEKAER.
• Remove the BOTTOM BRACKET.
• Remove the SIDE BRACKET.
• Remove the TOP FRAME.
• Remove the MAIN BASE.
• Remove the LCD PANEL UNIT.
(1) Remove the 14 screws [C].
(2) Remove the PANEL FRAME.
(3) Remove the LCD PANEL.
B
INVERTER PWB (SLAVE-T)
INVERTER PWB (SLAVE-B)
C
Fig.3-2
INVERTER PWB COVER
C
C
LCD PANEL
FRONT
BACK LIGHT UNIT
(No.YA665<Rev.001>)1-11