Memory Configuration - Asus RS720-E8-RS24-ECP User Manual

5.5.5

Memory Configuration

Enforce POR [Auto]
Allows you to enforce POR restrictions for DDR4 frequency and voltage programming.
Configuration options: [Auto] [Enforce POR] [Disabled] [Enforce Stretch Goals]
Memory Frequency [Auto]
Allows you to select the memory frequency setting.
Configuration options: [Auto] [1333] [1600] [1866] [2133]
Halt on mem Training Error [Enabled]
Allows you to enable or disable halt on mem Training Error.
Configuration options: [Disabled] [Enabled]
ECC Support [Auto]
Allows you to enable or disable the ECC support.
Configuration options: [Auto] [Disabled] [Enabled]
Data Scrambling [Auto]
Allows you to enable/disable data scrambling.
Configuration options: [Auto] [Disabled] [Enabled]
Enable ADR [Disabled]
Allows you to set the detecting and enabling of ADR.
Configuration options: [Disabled] [Enabled]
C/A Parity Enable [Auto]
Allows you to enable or disable the DDR4's command address parity.
Configuration options: [Auto] [Disabled] [Enabled]
Memory Topology
Displays memory topology with DIMM population information.
Memory Thermal
Allows you to configure thermal settings.
Set Throttling Mode [Disabled]
Configuration options: [Disabled] [OLTT] [CLTT]
OLLT Peak BW [xxx]
Allows you to set the peak allowed bandwidth for OLTT. This is in percentage and valid
offset values is from 25-100.
DIMM Temp Stat [xx]
Allows you to select DIMMTEMPSTAT as temp_mid or temp_hi.
Memory Power Savings Mode [Auto]
Allows you to configure the CKE and other related Memory Power Savings features.
Configuration options: [Auto] [Disabled] [APD On] [User Defined] [Reserve] [Reserved]
ASUS RS720-E8-RS24-ECP 5-29