Ariens 915175 Operator's Manual page 24

Install Battery
Install Factory Battery
See Figure 17.
1. Position battery in battery tray.
2. Align upper hole in hold-down bracket
over the 1/4 x 3/4" bolt. Position bracket
as shown in Figure 17.
3. Align hole in hold-down bracket with hole
in L bracket and insert the 1/4 x 1/2" bolt
through both holes.
4. Secure hold-down bracket with two hex
nuts.
5. Connect positive cable to positive battery
terminal and then the negative cable to
negative battery terminal.
6. Return seat to operating position.
Install U1 Battery
See Figure 18.
1. Remove hex nut from L bracket and
remove L bracket. Retain all parts for
reinstallation.
2
1. L Bracket
2. Battery Tray
3. Battery Anchor
Figure 18
See Figure 19.
2. Install U1 battery into battery tray.
3. Insert lower hole in battery hold-down
bracket over the 1/4 x 3/4" bolt. Position
bracket as shown in Figure 19 and secure
with one hex nut.
1
3
EN - 22
1
4
6
5
3
1. Positive (+) Battery Terminal
2. Negative (-) Battery Terminal
3. Battery Tray
4. Battery Hold-Down Bracket
5. 1/4 x 3/4" Bolt
6. Hex Nut
Figure 19
See Figure 20.
7. Insert hole in L bracket over bolt as
shown in Figure 20 and secure with one
hex nut.
8. Insert 1/4 x 1/2" bolt though holes in
battery hold-down bracket and L bracket
and secure with one hex nut.
4
1
2
1. L Bracket
2. Battery Tray
3. Battery Anchor
4. 1/4 x 1/2" Bolt
Figure 20
2
Front
3