Toshiba D-VR50KF Service Manual page 44

Message
This disc is protected and not
recordable.
Disc is full.
(No area for new recording)
You cannot record more than
99 titles on one disc.
(The maximum is 99.)
You cannot record more than
999 chapters on one disc.
(The maximum is 999.)
You cannot record on this disc
as Control Information is full.
You cannot record on the disc
as Power Calibration Area is
full.
This disc is already finalized.
Can not record on this disc.
You cannot record more than
49 titles on one disc.(The
maximum is 49.)
You cannot record more than
254 chapters on one disc.(The
maximum is 254.)
This program is not recordable
in +VR mode.
The disc has no recording
compatibility. (Set "Make
Recording Compatible" to
"ON" to convert the disk.)
If an error occurs during the timer recording, one of the following error numbers (40 to 42) or the above error
messages (error number: 1 to 39 and 43 to 46) is displayed on the recording menu after timer recording.
(Once the screen of the program line is exited, the program line for the error will be cleared.)
(No Error Message is displayed for the error No. 40 ~ 42.)
Message
Error message is not
displayed.
Solution
Release the disc protect
setting in the Disc Setting
menu.
Insert the recordable disc with
enough recording space.
Delete unnecessary titles.
Delete unnecessary chapter
markers.
Delete unnecessary titles.
Insert a new disc.
Release the finalizing for this
disc.
Repeat the same operation.
Delete unnecessary titles.
Delete unnecessary chapter
marks.
Set "DVD-RW Recording
Format" to "VR mode".
Please make the "Make
Recording Compatible" setting
"ON" when you want to add a
postscript.
Timer Programming
Date Start End
*
01/01 0:57 1:57
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
Solution
- Set the timer programming
correctly.
- Set the timer programming
before the start time.
- Insert a recordable videotape
with a record tab.
Turn the power on and set the
clock correctly then set timer
programming again.
Insert the recordable disc.
1-11-3
Error
Error Description
No.
29 Disc Protected Disc.
30 No available recording space.
Its recording capacity has been reached.
31
(Video Format Disc)
Its recording capacity has been reached.
32
(VR Format Disc)
The 999 chapter has been reached. (VR
33
Format Disc)
There is not space to record field of
34
control information.
35 PCA is Full. (in REC start)
36 It is finalized. (Video Format Disc)
37 Access to Memory Area range outside.
38 Sector Address is wrong.
39 BUP writing error of chapter editing.
The 49 titles has been reached. (+VR
43
Format)
The 254 chapter has been reached. (+VR
44
Format Disc)
During the CGMS picture (possible to
45
record once) input. (+VR Format Disc)
A postscript tried to be added to + VR
Format Disc where different Title Menu
46 from this machine when the Make
Recording Compatible setting was turned
off was recorded.
VCR DVD
VPS
DVD
CH Mode
VCR PDC
P08 DVD E40 ON
The speed mode changes to the error number.
A program with the error number is grayed out
and asterisked on the timer programming list.
Error
Error Description
No.
- Some portion has not been recorded
because of program overlapping.
40 - Recording did not start at the start time.
- No Videotape is inserted.
Videotape ran out during recording.
41 Power failed
42 No disc when recording
Priority
7
5
7
8
9
10
4
6
-
-
-
9
10
12
7
Priority
-
-
-
E9GA1FIS