INDOOR UNIT INSTALLATION
● The piping can be connected to the four directions indicated by , , ,
When the piping is connected to the direction of , or , detach
the knock-out either at the side or at the bottom of the unit. ( Fig. 3 )
1) INSTALLING THE WALL HANG BRACKET
22
Figure 3
REMOVE SCREW
30cm
or more
PLUMB
● In case of removing the unit from the wall hang bracket after
installing it onto the wall, remove by pushing up MARKS ( ▲ )
Note
at the bottom of the body.
10cm
or more
45cm
or more
Figure 4