Automatic Operation(For Heat Pump Model) - Toshiba RAS-300KSG Owners And Installation Manual

UNIT OPERATION
AUTOMATIC OPERATION (For Heat Pump Model)
Automatic operation means that the air conditioner operates automatically by selecting the COOL or HEAT mode and automatically changes the fan
speed according to the indoor condition to keep the room temperature comfortable.
Procaure
2
1,7
5,6
8
10
ON/OFF button
1
Press this button and the unit starts AUTO operation.
Mode button
2
If the unit is operating in another mode, press the MODE botton to select Auto.
For heat pump model
(AUTO) (COOL)
Fan button
3
Set the desired fan speed. At start up, fan speed is set to AUTO.
3 Temp ( ▲ , ▼ ) button
4
Set the desired temperature using the remote control buttons. At the start of the AUTO
operation, the temperature is set at 25°c and it is functional with in the total temperature range.
4
Vertical Swing button
5
Press this button to control the desired air flow direction up and down.
Horizontal Swing button
6
Press this button to control the desired air flow direction to the left and right side.
ON/OFF button
7
Press this button again to stop operation.
Hi Power Mode button
8
Press this button to cool down quickly and heat up indoor temperature.
● When the room temperature is between 21°c ~ 29°c.
- If the room temperature is lower 1°c or more than the set temperature : HEAT mode will be operated.
Note
- If the room temperature is higher1°c or more than the set temperature : COOL mode will be operated.
● When the room temperature is lower than 21°c or higher than 29°c, the operation mode is restricted regardless
of the set temperature.
- If the room temperature is lower than 21°c then only the heating mode is allowed.
- If the room temperature is higher than 29°c then only the cooling mode is allowed.
● The Auto operation is not suitable for the application to the computer room or some food/wine stock storage.
(DRY) (HEAT) (FAN)