ROHS ARES-5300 User Manual page 73

8. Connect the RF antenna's MHF connector to the Wi-Fi module's "MAIN"
connector.
Connect the RF
antenna's MHF
connector to the Wi-Fi
module's "MAIN"
connector
9. From the other end of the RF antenna, which is an SMA connector, remove
the washer and the nut. Save the washer and nut for later use. Note the
SMA connector has the form of a threaded bolt, with one flat side.
10. Pull the SMA connector through the above mentioned antenna hole. Note
to meet the aforesaid flattened side with the antenna hole's flat side.
Remove
the nut and
washer.
- 61 -
BIOS
Among the screw
thread, there is a
flat side.
Arrange the
flat side of the
SMA connector
to meet the
flat side of the
antenna hole.