Thermal Configuration - ROHS ARES-5300 User Manual

5.2.5. Thermal Configuration

Access this submenu to configure the thermal configuration.
The featured submenus are:
Setting
Critical Trip Set the value of temperature of the ACPI critical Trip point
Point When this point is reached, the OS will shut down the system.
Set the value of temperature of the ACPI Passive Trip point
Passive Trip
When this point is reached, the OS will begin to throttling the
Point
processor.
Active Trip Set the value of temperature of the ACPI Active Trip point
Points
5.2.6. SATA Configuration
Select this submenu to configure the SATA controller and HD.
Setting
SATA Controller(s)
SATA Test Mode
Configures SATA Mode
SATA Port 0 Hot Plug
Capability
SATA Port 1 Hot Plug
Capability
SATA Port 0 Connect
to an ODD
SATA Port 1 Connect
to an ODD
Serial ATA Port 0
Serial ATA Port 1
Description
Enables/disables the present SATA controller.
Enabled is the default.

Enables/disables the SATA test mode.
Configures how to sun the SATA drives.
Options available are AHCI (default) and IDE.

Enables/disables hot-pluggable feature for the SATA
port.
Enabled is the default.

Enables/disables the SATA port connect to an ODD
If enabled, when you connect an ODD to a SATA port.
The software auto detection for media insert and tray
will be enabled.
Disabled is the default.

Delivers the SATA port Media information and Security
Mode.
- 45 -
Description
BIOS