Security - ROHS ARES-5300 User Manual

5.3. Security

The Security menu sets up the TPM (Trusted Platform Module) device and
password for the system's administrator account. Once the administrator
password is set up, this BIOS Setup utility is limited to access and will ask for
the password each time any access is attempted.
Advanced
Main
Select TPM Device
TPM 1.2 Status
TPM Operation
Supervisor Password
Set Supervisor Password
F1 Help Select Item
ESC Exit Select Menu
The featured setting is:
Setting
Select TPM Select TPM device to initialize if a TPM device is installed.
Device
To set up an administrator password:
1.
Administrator
Password
2.
3.
InsydeH20 Setup Utility
Security Power Boot
<TPM 1.2>
Not Installed
<No operation>
Not Installed
F5/F6 Change Values
Enter Select  SubMenu
Select Administrator Password.
An Create New Password dialog then pops up
onscreen.
Enter your desired password that is no less than 3
characters and no more than 20 characters.
Hit [Enter] key to submit.
Exit
F9 Setup Defaults
F10 Save and Exit
Description
- 47 -
BIOS
Rev. 5.0
Select TPM Device to Initialize