3.2. Jumper & Connectors
The main board comes with some connectors to join some devices and some
jumpers to alter hardware configuration. The power board also comes with
some connectors. The following in this chapter will explicate each of these
components.
3.2.1. Main Board Connectors
This section will guide you through the connectors on the main board.
LANUSB1&2
Function:
RJ-45+USB stacked ports
Connector
RJ-45 LAN port with LED lamps and double-stacked USB 2.0
Type A connectors
Type:
LAN (RJ-45)
LED
Amber:1000M
Speed
Green: 10/100M
On: Linked
Link/Act
Blink: Network Activity
Off: No Link
Main Board Top
Pin Assignment:
Definition
System Configuration
JLAN2
JLAN1
Speed
A
A
B
B
- 17 -
Link/Act