Installation & Maintenance
4.1. Install Hardware
The ARES-5300 is constructed based on modular design to make it easy for
users to add hardware or to maintain the computer. The following sections will
guide you to the simple hardware installations for the computer.
4.1.1. Open the Computer
Most of the connectors are built on the top side of the main board. To access
these components, the computer's top cover has to go. Follow through the
steps below to remove the top cover from the computer.
1.
Place the computer on a flat surface. Loosen and remove the 10 screws
from the computer's four edges as shown in the illustration below:
2.
Remove the 2 side covers completely from the computer.
- 26 -