Part Installation; Connection Of Handle Part And Push Rod; Handle Forward Assembly - Beko VRT6221 User Manual

3

Part installation

3.1 Connection of handle part
and push rod
1. Place push rod vacuum cleaner on the ground
according to direction in the picture during
connection, vertically ground brush installation
hole below the handle part into main body
upper cover.
2. Forcibly press the handle part downwards
until hearing 'crack' sound,- and complete
installation.
Handle
C
consistent with ground brush
direction during assembly, reverse
assembly should be avoided.
Cordless Stick Vacuum Cleaner / User Manual
direction should

3.2 Handle forward assembly

1. Press the metal pipe button shown in the
picture if the handle part should be removed
during packaged storage.
2. Pull the handle part- according to direction in
the picture synchronously, and remove from
the installation hole.
be
9 / 22 EN