Installation Of Battery Pack And Hand; Held Vacuum Cleaner; Installation Of Hand-Held Vacuum Cleaner And Push Rod Vacuum Cleaner - Beko VRT6221 User Manual

3 Part installation
3.3 Installation of battery
pack and hand-held vacuum
cleaner
1. Battery pack installation: turn over the hand-
held vacuum cleaner to the back.
2. Push the sliding block of battery pack cover
plate downwards.
3. Open cover plate, locate the battery pack,
vertically insert it into machine body battery
case according to direction in the picture,
replace the battery pack cover plate after
installation, and finish hand-held vacuum
cleaner assembly;
4. Push the button according to arrow direction.
5. Take out battery cover plate upwards.
C
The battery pack insertion hole
direction is consistent with host
machine plug direction.
10 / 22 EN
3.4 Installation of hand-held
vacuum cleaner and push rod
vacuum cleaner
1. Hold hand-held vacuum cleaner handle when
hand-held vacuum cleaner is installed on push
rod vacuum cleaner, align round air inlet of
push rod vacuum cleaner(position shown in the
picture).
2. Insert to the bottom, and rotate hand-held
vacuum cleaner according to direction in the
picture until 'click' locking sound is heard.
3. Firstly hold hand-held release button, then take
out hand-held vacuum cleaner according to
rotation direction shown in the figure when the
hand-held vacuum cleaner should be removed
and used singly.
Cordless Stick Vacuum Cleaner / User Manual