Connection Of Hand-Held Vacuum Cleaner And Handle - Beko VRT6221 User Manual

4 Operation
Align long hose square adapter
port to dust cup air inlet of hand-
C
held vacuum cleaner as shown in
the picture, and then vertical insert
to the stop position according to
direction in the picture.
Connection of flexible hose and two-
in-one hair brush: vertically insert
connector according to direction
in the picture, and vertically insert
C
until it can not be moved;
Other accessories connected with
flexible hose: long flattened cleaner,
bed brush and soft hair brush. The
connection methods are the same
as the above-mentioned method.
Long hose
Two-in-one accessories
Long flattened cleaner
Bed brush
Soft hair brush
14 / 22 EN
4.5 Connection of hand-held
vacuum cleaner and handle
C
Press and push out
C
Bed brush
Cordless Stick Vacuum Cleaner / User Manual
Remove handle, press handle
button, push out and open the
rubber plug, then insert the square
adapter port on the handle end into
dust cup air inlet of the hand-held
vacuum cleaner.
Vertically insert the ceiling brush
into terminal of handle according
to direction in the picture;