Table Of Contents - Electronics International UBG-16 Operating Instructions Manual

Warranty ---------------------------------------------------------------------------------------------------
I
ntroduction -----------------------------------------------------------------------------------------------
Mode Selector Switch -----------------------------------------------------------------------------------
Normal Operating Mode -------------------------------------------------------------------------------
Step Switch ------------------------------------------------------------------------------------------------
1. Displaying the EGTs and CHT's: ---------------------------------------------------------------
2. Displaying a Temperature on the 7th Column of Bars: ---------------------------------------
3. Displaying Other Temperatures and/or Functions Digitally: ---------------------------------
4. Displaying the Shock Cooling Rate: ------------------------------------------------------------
5. Displaying the Peak EGT and Cylinder: -------------------------------------------------------
6. Displaying the EGT Difference: ----------------------------------------------------------------
Scanning Through the Channels Automatically ---------------------------------------------------
Normalized Operating Mode --------------------------------------------------------------------------
Lean Operating Mode ----------------------------------------------------------------------------------
1. False Peaks: ---------------------------------------------------------------------------------------
2. Leaning on the Rich Side of Peak: --------------------------------------------------------------
3. Alternate Method for Leaning on the Rich Side of Peak: ------------------------------------
4. Leaning on the Lean Side of Peak: -------------------------------------------------------------
5. Method for Checking the Mixture Setting when Operating on the Lean Side of Peak: ---
Alarms ------------------------------------------------------------------------------------------------------ 10
1. High and Low Alarm Annunciators: ------------------------------------------------------------ 10
2. EGT Differential Alarm Annunciator: ---------------------------------------------------------- 10
3. Shock Cooling Alarm Annunciator: ------------------------------------------------------------- 10
4. Finding the Channel on which a Programmed Limit has been Violated: -------------------- 10
5. Canceling all Active Alarms for 10 Minutes: -------------------------------------------------- 11
6. Activating all Canceled Alarms: ---------------------------------------------------------------- 11
Programming the 34 Limits ---------------------------------------------------------------------------- 11
Programming the High and Low EGT and CHT Limits ----------------------------------------- 11
1. Selecting the High EGT Limits: ----------------------------------------------------------------- 11
2. Selecting the Low EGT Limits: ------------------------------------------------------------------ 12
3. Selecting the High CHT Limits: ----------------------------------------------------------------- 12
4. Selecting the Low CHT Limits: ----------------------------------------------------------------- 12
Contents
Page 1 of 2
2
3
3
3
4
4
4
5
5
5
6
6
6
7
8
8
9
9
9