Operating Instructions - Harbor Breeze 40956 Installation Manual

OPERATING INSTRUCTIONS

1. The fan pull chain has four positions to control fan
speed. One pull is HIGH, two is MEDIUM, three is LOW
and four turns the fan OFF.
The light pull chain has two positions to control the light,
ON and OFF.
2. Use the fan reverse switch, located on the switch
housing (I), to optimize your fan for seasonal
performance.
Using a ceiling fan will allow you to raise your
thermostat setting in summer and lower your thermostat
setting in winter without feeling a difference in your
comfort.
Note:

Wait for the fan to stop before moving the reverse
switch.
2a. In warmer weather, push the reverse switch left to
display a sun icon, which will result in downward airflow
creating a wind chill effect.
2b. In cooler weather, push the reverse switch right
to display a snowflake icon, which will result in upward
airflow that can help move stagnant, hot air off the
ceiling area.

Important: The reverse switch must be set either
completely left or right in order for the fan to function
correctly. If the reverse switch is set in the middle
position, the fan will not operate (Fig. 2c).
1
Light Pull
Chain
2
I
Fig. 2a
17
Fan Pull
Chain
Reverse
Switch
Fig. 2b
Fig. 2c