SoftBank 921T Instruction Manual page 223

Switching to Card Reader Mode by Connecting the
USB Cable
q
In Standby, connect the handset to a
PC with the USB cable
•
Open the cover of External Device Port and
plug in the connector of the USB cable
with the inscription facing down.
•
If the Connection is set to Always Ask,
select Card Reader.
•
If Connection is set to Communication,
the handset does not change to Card
Reader mode when connecting the USB
cable in Standby.
•
If the handset is not in Standby when
connecting the USB cable, the handset
changes to Communication mode even if
Connection has been set to Card Reader
or Always Ask.
Transferring Data
q
Switch your handset to Card Reader
mode
w
Follow the instructions on the PC
Canceling the Card Reader Mode
q
Use the connected PC s function to
remove an external device
w
Remove the USB cable from the
handset
More Features
Functions for PC Connection
(
E
Settings for PC Connection
(
E
• Use the USB Cable for Charging
page 12-15)
page 13-37)
12
12-9