Dimensions - Nitec Hex-Par 12 User Manual

6

DIMENSIONS

84
253
200
98
13
The IR6 infrared controller enables remote control of the HEX-PAR 12.
To pair the IR6 to the HEX-PAR 12, follow these steps:
1. Press MENU button until SEr is displayed
2. Press ENTER
3. Press UP or DOWN to turn infrared operation ON or OFF
4. Press ENTER
IR6 BUTTON FUNCTIONS
AUTO
FADE
SPEED
+ / -
SOUND
SENSITIVITY
+ / -
MANUAL
0-9
R
G
B
A
W
UV
+ / -
%
+ / -
STROBE
+ / -
STROBE
BLACKOUT
94
BLACKOUT
Note:
INFRARED (IR6) REMOTE CONTROL OPERATION
: Run auto programs
: Fade auto programs
: Enable speed adjustment of auto programs
: Increase / decrease speed of auto programs
: Activate sound-active mode
: Enable sound sensitivity adjustment
: Increase / decrease sound sensitivity
: Enable static color selection
: Select static colors
: Select red
: Select green
: Select blue
: Select amber
: Select white
: Select UV
: Increase / decrease output of each color
: Enable adjustment of total light output level
: Increase / decrease total light output
: Enable adjustment of strobe rate
: Increase / decrease strobe rate
: Press again to turn off strobe
: Turn off all light output
: Press again to exit blackout mode
: If IR6 remote is not responding, press BLACKOUT to confirm
that blackout mode was not mistakenly activated
11