Table of Contents
Advertisement
Hardwiring (Stealth Installation)
Depending on your vehicle and where your cigarette lighter is located,
you can choose to use the included power adapter, or opt for our
"hardwire" stealth kit.
Some vehicles have a switched cigarette lighter output, so if you connect
it here, the camera always turns on and off with the cars. Other vehicles,
such as older German cars have an always-on outlet, so you either have
to manually connect/disconnect the camera or you can hardwire it.
The included power adapter is approximately 12 feet and can be routed
around your windshield and down the pillar, under you glove box and to
the cigarette lighter outlet for a clean install.
Stealth Hardwiring
If you would like a stealth install that you never have to worry about, we
sell a hardwire kit. You can use it to tap into your "Accessory" wire and
the camera turns on and off with the vehicle. You never have to
remember to turn it on. Using a hardwire kit requires some basic
technical skills. Depending on your vehicle, you can route the wires to
the back of your cigarette lighter or fuse panel. If wiring to a fuse panel,
please use a multi-meter or a test light to find a fuse that is ON when
vehicle is in Accessory/Ignition and is off when vehicle is off.
http://www.amazon.com/dp/B00TGQ1Y3Q/
Amazon: WheelWitness Hardwire Kit
P a g e
| 19
Hide quick links:
Advertisement
Table of Contents
