Powering The Camera On; Manual Power On/Off - Wheel Witness HD PRO Plus Owner's Manual

If you have a SWITCHED outlet, you can leave the power adapter always
plugged in and the camera will turn ON and OFF with the vehicle.
Some vehicles have an "always on" outlet. In this case you will have to
manually disconnect the power adapter OR you can choose to hardwire
the camera using our hardwire kit.
Available on Amazon: "WheelWitness hardwire kit"
https://www.amazon.com//dp/B00TGQ1Y3Q/
Powering the Camera On
The HD PRO Plus has "Auto Power On/Off" – Once the camera receives
power (usually when vehicle is started) it will automatically turn on and
start recording. Once the power is cut (engine is turned off) the camera
will save the current file and power down within 10 seconds.
Manual Power On/Off
To manually turn on, press the POWER button.
To turn off, hold power button for 2 seconds.
P a g e | 6