Manual Structure; Purpose Of This Manual; Relative Manuals; Contents - Sony CCU-TX50 Service Manual

Purpose of this manual

Relative manuals

Contents

CCU-TX50/V2

Manual Structure

This manual is the service manual for Camera Control Unit CCU-TX50/TX50P.
This manual describes the information on the premise of component level service,
assuming use of system and service engineers.
Besides this "service manual", the following manuals are available for this unit.
. . . . . Service Manual Vol.1 CCU-TX50/TX50P (Available on request)
Contains the information on the premise of component level service (installation,
system setup, service overview and electrical alignment) of the CCU-TX50/
TX50P.
Part number: 9-968-091-0X
. . . . . Operation Manual (Supplied with this unit)
This manual is necessary for application and operation of this unit.
Part number: 3-863-128-XX
. . . . . "Semiconductor Pin Assignments" CD-ROM (Available on request)
This "Semiconductor Pin Assignments" CD-ROM allows you to search for
semiconductors used in B&P Company equipment.
The service manual contains a list of semiconductors and their ID Nos., and thus
should be used together with the CD-ROM.
Part number: 9-968-546-XX
The following are summaries of all the sections for understanding the contents of
this manual.
Section 1 Spare Parts
Contains parts list, exploded views, frame list, supplied accessories and fixtures list
used in the unit.
Section 2 Semiconductor Pin Assignments
Contains information on semiconductors used for the unit.
Section 3 Block Diagrams
Contains the block diagrams of overall and each circuit board.
Section 4 Schematic Diagrams
Contains schematic diagrams for every circuit board and frame wiring.
Section 5 Board Layouts
Contains board layouts for every circuit board.
3 (E)