Operator Manual Hot Water Dispensers HWD2, HWD3, HWD5 Activate your warranty now at http://gmcw.com/warranty-registration Model HWD2 Table of Contents Safety Information....2 Maintenance ......5 Rough-In Drawing....3 Troubleshooting......7 Specifications......4 Parts Diagram......8 Installation.......4 Wiring Diagram.......9 Cleaning........5 Decals........11 Adjustments ......5 Thank you for purchasing this quality water heater. For your safety and the safety of others, read all warnings and the operator manual before installing or using the product.
This equipment must be installed in compliance with applicable Federal, State, and/or Local plumbing codes having jurisdiction. This product requires an approved back flow prevention water device, such as a double check valve, to be installed between the machine and the water supply. GB Series Cecilware Cecilware Hot Water Dispensers ®...
NSF Sanitation; 2 gal 115V / 1Ph / 50/60 Hz / 11.5 A / 1300 W 24” x 9.4” x 21.25” HWD2 cULus Electrical 7.6 L 120V / 1Ph / 50/60 Hz / 14 A / 1700 W 61 cm x 24 cm x 54 cm NSF Sanitation;...
USE OF THESE PRODUCTS WILL VOID THE Grindmaster-Cecilware for all warranty claims. WARRANTY. Grindmaster-Cecilware provides the industry’s Daily BEST warranty. Visit our website at gmcw.com for Wipe the outside of the unit with a damp cloth, using warranty terms and conditions.
Page 6
Probe, the problem may be in the Solid State Dual Level Control Board. 3. If water starts flowing into the tank, the Probe may be grounded, due to excessive liming. Check with Ohm meter. 4. Clean or replace probe. Cecilware Hot Water Dispensers ®...
If you need help, call Grindmaster-Cecilware Technical Service Department, (502) 425-4776 or (800) 695-4500 (USA & Canada only) (Monday through Friday 8 AM - 6 PM EST). Please have the model and serial number ready so that accurate information can be given.