NETGEAR D2200D-1FRNAS User Manual page 82

- Concrete

To wall-mount the gateway:
1. Drill holes in the wall where you want to wall-mount the gateway.
Holes must be 6-9/16 in.
(167 cm) center to
2. Install wall anchors in the holes.
3. Use pan head Phillips wood screws, 3.5 x 20 mm (diameter x length, European) or No. 6
type screws, 1" inch long (U.S.).
4. Insert screws into the wall anchors, leaving 1/8 inch (3 mm) of each screw exposed.
ADSL2+ Gateway
center.
DRAFT
Wall-Mount the Gateway
82