Cable Your Gateway - NETGEAR D2200D-1FRNAS User Manual

Cable Your Gateway

The gateway comes configured to work as both a modem and a router. You can share your
Internet connection without connecting the gateway to a router or gateway.

To cable your gateway:
1. Connect the phone line cable that came in the package to the DSL port.
DSL port
2. Connect the other end of the phone line cable to your DSL line wall jack.
3. Connect the power adapter provided in the package to the gateway and plug the power
adapter in to an electrical outlet.
4. Press the Power On/Off button.
The Power LED lights green.
To set up your Internet connection, you must connect a computer or wireless device to the
gateway's network and use a web browser. See
Chapter 3, Specify Your Internet
ADSL2+ Gateway
Connect to the Network
Settings.
DRAFT
Hardware Setup
10
Power Power
On/Of adapter
button input
on page 12 and