7.
When prompted, click the OK button to confirm that you want to reboot the gateway.
The gateway reboots.
Specify the VPN Pass-Through Method
You can specify which kind of VPN pass-through the gateway uses. By default, the gateway
is set up to use PPTP, L2TP, and IPSec.
To specify VPN passthrough:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type http:/192.168.254.254.
A login window opens.
3.
Enter the user name and password.
The user name is admin. The default password is admin. The user name and password
are case-sensitive.
The Main page displays.
4.
Select Advanced.
5.
When prompted, click the Yes button to proceed.
The Advanced page displays.
6.
Select VPN.
The VPN page displays.
7.
Select or clear the following check boxes:
•
PPTP PassThru
•
L2TP PassThru
•
IPSec PassThru
8.
Click the Apply button.
Your settings are saved.
ADSL2+ Gateway
DRAFT
Manage Your Network
76