Sony TA-ZH1ES Operating Instructions Manual page 28

Menu Item List
You can set the following items on the menu.
The default settings are underlined.
Setting items
[DSEE HX]
Upscales compressed or CD quality sound
source to near hi-resolution sound quality.
You can also turn the DSEE HX function on/
off by pressing DSEE HX on the remote
control. When you set to on, the setting that is
selected on this menu is recalled.
[DSD REMASTERING]
Converts all PCM signals to DSD signals of 11.2
MHz.
This setting works in the same way as pressing
DSD REMASTERING on the remote control.
[D.C.PHASE LINEARIZER]
Lets you approximate the low frequency
phase characteristics to a traditional analog
amplifier.
[DIMMER]
Changes the brightness of the display window
and turns the indicators on/off .
[DISPLAY]
Changes the display in the display window
while playing.
This setting works in the same way as pressing
DISPLAY on the remote control.
28
GB
Setting value
[OFF]: Off
•
[STANDARD]: Standard mode
•
[FEMALE VOCAL]: Suitable mode for female
•
vocal
[MALE VOCAL]: Suitable mode for male
•
vocal
[PERCUSSION]: Suitable mode for the
•
percussive source
[STRINGS]: Suitable mode for the strings
•
source
Note
The DSEE HX function works only in the PCM signal
with a sampling frequency of 48 kHz and less and a
bit depth of 24 bit or less.
[OFF]: Off
•
[ON]: On
•
[OFF]: Off
•
[ON]: On
•
[BRIGHT]: The display window and
•
indicators are bright.
[DARK]: The display window is dim.
•
[DISPLAY OFF]: The display window and
•
indicators are turned off.
Notes
The  (power) indicator does not turn off
•
regardless of this setting.
The display window lights brightly while operating
•
the amplifier or remote control regardless of this
setting.
[NORMAL]: Normal playback display (input
•
name, input signal, volume level)
[FORMAT]: Input/output signal display
•
(format, sampling frequency, and bit depth
of the input/output signal)