Table of Contents
Advertisement
Test accessories and calibration kits
Test accessories and calibration kits that can be used with the E5061B are listed in this section. A complete line of test
accessories and calibration kits can be found at the Agilent RF and Microwave Test Accessories Web site:
www.agilent.com/find/accessories
Test accessories
Test accessories such as test port cable are necessary for a complete measurement system using the E5061B. Order test
accessories in accordance with the desired measurement system.
Calibration kits
Calibration is an accuracy enhancement procedure that effectively reduces the system errors that cause uncertainty in
network measurement. Calibration kit is necessary to perform the calibration.
• Mechanical calibration kits include standards, such as opens, shorts and loads, which are measured by the network
analyzer. Choose a calibration kit for each connector type to be used.
• Electronic calibration (ECal) modules
that is controlled by the network analyzer via USB. ECal modules provide many different impedances to the test ports
which enables a full two-port calibration to be performed quickly with a single connection. This technique reduces
operator errors and connector wear and abrasion.
1. ECal modules don't cover the whole frequency range of the E5061B. Check whether the frequency range of each ECal module meets your
measurement needs.
replace mechanical calibration standards with one solid-state calibration module
1
Mechanical calibration kits
Electronic calibration (ECal) modules
5
Advertisement
Table of Contents
