First Use - Smeg ECF01 Instruction Manual

3.2 First use

1. Turn on the espresso machine using the
ON/OFF switch (1): the lights of the
three buttons (2), (3) and (4) will flash in
sequence.
2
2. Lights (2) and (3) will flash to indicate
that the machine is reaching the pre-set
temperature. The espresso machine is
ready for use as soon as the lights stop
flashing.
3 4
1
Use
3. Place a container under the hot water/
steam wand (4).
4. Turn the steam valve (5) to the
position and dispense 1/2 cup of water.
5. Turn the steam valve (5) back to the
position
.
4
Make 4-5 espressos or 4-5
cappuccinos to obtain a
satisfactory result.
6. Attach the filter holder by aligning the
handle with
right to the
7. To rinse the machine's internal circuits,
place a container under the coffe spout
and press the
8. Repeat this procedure 5 times.
5
and turning it to the
position.
button.
11