Kenwood VR-6060 Instruction Manual page 45

Specifications
DIGITAL AUDIO section
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96kHz
Input level / impedance / wave length
Optical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30nm
Coaxial ................................................................. 0.5 Vp-p / 75 Ω
VIDEO section
VIDEO inputs / outputs
VIDEO (composite) ................................................. 1 Vp-p / 75 Ω
S VIDEO inputs /outputs
S VIDEO (luminance signal) .................................. 1 Vp-p / 75 Ω
S VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 Ω
COMPONENT inputs / outputs
COMPONENT (luminance signal) ......................... 1 Vp-p / 75 Ω
COMPONENT (chrominance signal) ...... +/– 0.32 V Vp-p / 75 Ω
FM tuner section
Tuning frequency range ................................ 87.5 MHz ~ 108.0 MHz
Usable sensitivity (MONO)
VR-6060 . 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)
KRF-V8060D ..... 1.6 µV (75 Ω)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB)
50dB quieting sensitivity
STEREO ................................................... 28 µV (75 Ω)/ 40.2 dBf
Total harmonic distortion (1 kHz)
MONO ............................................................ 0.5% (65 dBf input)
STEREO ......................................................... 0.7% (65 dBf input)
Signal to noise ratio (1 kHz, 75 kHz DEV.)
MONO .......................................................... 75 dB (65 dBf input)
STEREO ....................................................... 68 dB (65 dBf input)
Stereo separation (1 kHz) .......................................................... 40 dB
Selectivity (±400 kHz) (VR-6060) .............................................. 70 dB
(KRF-V8060D) ........................................ 50 dB
Frequency response ................... (30 Hz ~ 15kHz), +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range
10 kHz step ............................... 530 kHz ~ 1,700 kHz (VR-6060)
10 kHz step ........................ 530 kHz ~ 1,610 kHz (KRF-V8060D)
9 kHz step .......................... 531 kHz ~ 1,602 kHz (KRF-V8060D)
Usable sensitivity ............................................... 16 µV / (600 µV/m)
Signal to noise ratio (30% mod. 1 mV input) .......................... 50 dB
GENERAL
Power consumption VR-6060 ...................................................
KRF-V8060D ............................................
Maximum power consumption (For other countries) ...........
AC outlet
SWITCHED VR-6060 ........................ (total
KRF-V8060D ................. (total
Dimensions .................................................... W :
Weight (Net)
VR-6060 .............................................................
KRF-V8060D ......................................................
For the U.S.A.
FCC Compliance Notice
Audio-video Receiver VR-6060,
These devices comply with Part 15 of FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
KENWOOD U.S.A. CORPORATION
2201 East Dominguez St., Long Beach, CA 90801-5745
Telephone: 310-639-9000
Notes
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
•VR609/36-48/EN
A
W
W
W, A max.)
W, A max.)
mm ( ")
H : mm ( ")
D : mm ( ")
kg ( lb)
kg ( lb)
45 10/24/01, 11:10 PM
45
EN