Kenwood VR-6060 Instruction Manual page 34

Ambience effects
Dimension mode (Pro Logic II Music mode only)
When listening to music with certain recordings, you will also be able to
achieve a suitable balance from all the speakers by adjusting the
dimension mode.
1 Press the SOUND and M M M M M / ? ? ? ? ? keys until "DIMENSION" appears on
the display.
2 Use the MULTI CONTROL knob or Joystick to adjust the
soundfield towards the rear or the front.
Soundfield is adjusted towards the front.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
Soundfield is in neutral postion.
SP MUTE OPTICAL 6CH INPUT AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
Soundfield is adjusted towards the rear.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
Center Width mode (Pro Logic II Music mode only)
Center width adjustment allows you to enjoy an enchanced sound when
listening to music through center image from only center speaker, or left
and right speakers or various combinations adjustments.
1 Press the SOUND and M M M M M / ? ? ? ? ? keys until "CENTER WIDTH" appears
on the display.
• The CENTER WIDTH indication scrolls across the display.
• When the center speaker is switched OFF, this mode will not be
effective.
2 Use the MULTI CONTROL knob or Joystick to adjust the left-
center-right output.
Center image will be heard from center speaker only.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
Center image will be heard from left and right speakers only.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
• When in other postions, center image from center speaker, left and
right speakers can be heard simultaneously with various
combinations.
34
EN
•VR609/29-35/EN
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
ACTIVE EQ. MATRIX
RTY
Surround EX
PRO LOGIC
DSP MODE DISCRETE LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
↓
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
ACTIVE EQ. MATRIX
RTY
Surround EX
PRO LOGIC
DSP MODE DISCRETE LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
↓
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
ACTIVE EQ. MATRIX
RTY
Surround EX
PRO LOGIC
DSP MODE DISCRETE LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
ACTIVE EQ. MATRIX
RTY
Surround EX
PRO LOGIC
DSP MODE DISCRETE LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
RDS
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
THX
ACTIVE EQ. MATRIX
RTY
Surround EX
PRO LOGIC
DSP MODE DISCRETE LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
34
Subwoofer adjustment
It is easy to adjust the volume of the subwoofer using the remote control.
1 Press the SOUND and M M M M M /? ? ? ? ? keys until "SUBWOOFER" appears
on the display.
CINEMA EQ.
SP MUTE OPTICAL 6CH INPUT AUTO DETECT
ACTIVE EQ.
A B CLIP
COAXIAL ANALOG 96kHzfs DSP MODE
L C SW R
LFE
SL S SB SR
2 Use the MULTI CONTROL knob or Joystick to adjust the volume.
• The adjustment range is –10 dB to +10 dB.
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
Each time you press the DIMMER key, the display brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
1 BRIGHT
2 MEDIUM
3 DARK
96kHz LPCM playback
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode to "STEREO".
• When "FS 96kHz LPCM" appears in the display, press the STEREO key
(the listen mode changes to the STEREO mode) to output sound from
the speakers.
10/24/01, 10:39 PM
DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
MATRIX
RTY
Surround EX
DISCRETE PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED