Huawei Quidway S9300 Configuration Manual - Wan Access page 35

Quidway S9300 Terabit Routing Switch
Configuration Guide - WAN Access
l
Issue 02 (2011-07-15)
aaa
The AAA view is displayed.
3. Run:
local-user user-name password { simple | cipher } password
The username and password of the authenticated are added to the local user list.
4. Run:
quit
Return to the system view.
5. Run:
interface interface-type interface-number
The interface view is displayed.
6. Run:
ppp authentication-mode chap [ pap ]
The local end authenticates the peer end using CHAP.
You can run the ppp authentication-mode chap pap command to perform CHAP
negotiation preferentially in LCP negotiation. If the peer end does not support CHAP
authentication, PAP negotiation is performed. If the peer end does not support CHAP
or PAP, the LCP negotiation fails. Either CHAP or PAP is involved in a PPP
negotiation.
7. Run:
restart
The interface is restarted.
In authentication, if the username and password of the interface on the peer end are
consistent with the username and password in the local AAA user list, the
authentication succeeds.
Configuring the authenticated
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The interface view is displayed.
3. Run:
ppp chap user user-name
The local username is configured.
4. Run:
ppp chap password { cipher | simple } password
The password of the local end is configured, which is used when the local end is
authenticated by the peer end using CHAP.
5. Run:
restart
The interface is restarted.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 PPP Configuration
28